Try Before You Buy

Download a free sample of any of our exam questions and answers

  • 24/7 customer support, Secure shopping site
  • Free One year updates to match real exam scenarios
  • If you failed your exam after buying our products we will refund the full amount back to you.

Prepare Important Exam with H12-323_V2.0 Exam Dumps(2025) [Q315-Q337]

Share

Prepare Important Exam with H12-323_V2.0 Exam Dumps(2025) 

Pass Exam Questions Efficiently With H12-323_V2.0 Questions


Huawei H12-323_V2.0 (HCIP-WLAN V2.0) exam is ideal for WLAN engineers, network administrators, and IT professionals who want to advance their career in wireless networking. HCIP-WLAN V2.0 certification will provide professionals with the knowledge and skills required to design, deploy, and manage WLAN networks in a variety of industries such as healthcare, education, hospitality, and more. With the Huawei H12-323_V2.0 (HCIP-WLAN V2.0) certification, professionals can demonstrate their expertise in WLAN technologies and stand out in a competitive job market.

 

NEW QUESTION # 315
In WLAN network, which of the following descriptions about Symbol and GI is wrong?

  • A. GI is in microseconds, indicating a protection interval
  • B. Symbol's unit is microseconds, which indicates the time required to transmit the modulated data of each channel together.
  • C. The role of GI is to reduce the interference between symbols
  • D. The larger the GI, the higher the transmission efficiency

Answer: D


NEW QUESTION # 316
When WAC works in cloud mode, the local license does not take effect. Otherwise, WAC cannot manage FIT APs.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 317
Huawei wireless controller web can view device alarm information. Alarm levels are classified by severity. Which of the following categories are included? (Multiple choice)

  • A. Clear
  • B. Not important
  • C. Secondary
  • D. Emergency

Answer: A,C,D


NEW QUESTION # 318
Which of the following networking methods are recommended for outdoor WDS planning?
(Multiple choice)

  • A. Root to eight leaves
  • B. Two-hop relay between root and leaf
  • C. Root to four leaves
  • D. One-hop relay between root and leaf

Answer: B,C,D


NEW QUESTION # 319
When deploying the NaviAC function, you need to pay attention to some constraints. Which of the following descriptions of the NaviAC constraints are correct? (Multiple choice)

  • A. The wireless configuration synchronization function is not supported between Local AC and Navi AC. The relevant service parameters need to be manually configured to be consistent
  • B. Multiple Locals are not supported Roaming function between ACs
  • C. The software versions of Local AC and Navi AC can be different and compatible with each other.
  • D. A roaming group cannot be established between Local AC and Navi AC

Answer: A,B,C,D


NEW QUESTION # 320
In WLAN network planning in crowded scenarios such as lecture halls or banquet halls, due to the large number of concurrent users, engineers will give priority to APs with fewer MIMOs but more radio frequencies when selecting AP models.

  • A. False
  • B. True

Answer: A


NEW QUESTION # 321
Which of the following descriptions of WLAN network capacity optimization methods are correct?
(Multiple choice)

  • A. For scenarios where AP coverage overlaps, configure the load balancing function to guide some terminals to migrate to APs with relatively light loads.
  • B. Configure the device and the terminal to communicate using the Wi-Fi 6 protocol to increase the terminal rate
  • C. Limit user rates while ensuring user experience and ensure network availability for most users
  • D. When the currently deployed APs cannot meet the capacity requirements, the number of APs can be increased.

Answer: A,B,D


NEW QUESTION # 322
Which of the following descriptions about the AC networking mode included with the board is wrong?

  • A. The onboard AC networking can realize the unified management of wired and wireless networks and improve the efficiency of network operation and maintenance
  • B. Compared with independent WAC networking, on-board AC networking can effectively reduce network construction costs.
  • C. The AC can be deployed in the aggregation layer or the core layer of the network and is suitable for WLAN networks in medium and large campuses.
  • D. Compared with independent WAC networking, on-board AC networking supports more WLAN functions and features.

Answer: D


NEW QUESTION # 323
In VRRP hot standby networking, in order to simplify the command line configuration of the standby WAC, you can enable the wireless configuration synchronization function. Through the wireless configuration synchronization function, the active VAC can use the HSB active-standby channel to synchronize the public wireless configuration to the standby WAC.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 324
A small enterprise uses the Leader AP networking architecture to deploy a WLAN network. In this network, the Leader AP does not act as a gateway, the SSID is Guest, and the password is
88888888. When the network engineer uses the PCTeb interface to configure the Leader AP, which of the following configuration operations are correct? (Multiple choice)

  • A. Set the Leader AP to work in gateway mode
  • B. Set the wireless network name to Guest
  • C. After logging into the device for the first time through a browser, you need to configure a username and password
  • D. Set the Leader AP working mode to FAT

Answer: B,C,D


NEW QUESTION # 325
In WLAN networks, which of the following descriptions of the four transmission systems, SISOMISO, SIMO, and MIMO, are correct? (Multiple choice)

  • A. In SIMO transmission system, two signals can be transmitted simultaneously
  • B. In the MISO transmission system, two signals can be transmitted simultaneously
  • C. In a SISO transmission system, only one signal can be transmitted
  • D. In the AMIMO transmission system, two signals can be transmitted simultaneously

Answer: C,D


NEW QUESTION # 326
The engineer inspected the customer's wireless network and found that the service experience was not good using the terminal. The engineer checked the terminal service experience through the user journey function of CampusInsight.

The user journey is shown in the figure below. Which of the following may be the cause of this poor user experience?

  • A. The terminal itself has poor performance, resulting in a low negotiation rate
  • B. The terminal enters power saving mode, resulting in packet loss
  • C. Low terminal signal strength leads to poor experience
  • D. The terminal does not support the 802.11r protocol and cannot perform 802.11r roaming, resulting in poor roaming performance

Answer: C


NEW QUESTION # 327
In order to ensure the security of WLAN network, a shopping mall adopts MAC authentication as the access authentication method of dumb terminals. When configuring security policies, which of the following security policies can engineers choose? (Multiple choice)

  • A. WPA/WPA2-PPSK
  • B. OPEN
  • C. WPA/WPA2-DPSK
  • D. WEP

Answer: B,C


NEW QUESTION # 328
WLAN Planner supports sharing function. The sharing function shares the source file. The party being shared can edit, share or delete the project.

  • A. False
  • B. True

Answer: A


NEW QUESTION # 329
When optimizing wireless networks, it is recommended to configure port isolation on the device interface directly connected to the AP. If port isolation is not configured, a large number of unnecessary broadcast messages may be generated in the VLAN, causing network congestion and affecting user experience.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 330
The engineer logs in to the wireless controller web interface and checks the AP health details as shown in the figure below. The AP health value is only 30. Which of the following may be the reasons for the low health value? (Multiple choice)

  • A. The CPU utilization of 7 APs exceeds 20%
  • B. The terminal access failure rate of 7 APs exceeds 20%.
  • C. 7 APs are in the online failure state
  • D. The number of users connected to 7 APs exceeds 40.

Answer: B,C,D


NEW QUESTION # 331
80211r roaming is applicable to many scenarios. The authentication and key negotiation process is omitted during roaming, and the latency is low.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 332
In the Layer 3 inter-WAC roaming scenario, if the terminal data forwarding mode is configured as direct forwarding mode, and the WAC and the user's gateway are reachable at Layer 2, then the user's home agent can be configured on the HAC to reduce the burden on the HAP and shorten the tunnel length from the FAP to the home agent, thereby improving forwarding efficiency.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 333
By configuring QoS policies based on application protocols, non-critical services can be prevented from excessively occupying wireless resources and causing packet loss for core services. Which of the following actions can this function perform for the identified application protocol? (Multiple choice)

  • A. Modify the priority of the specified message
  • B. Limit the rate of specified messages
  • C. Discard the specified message
  • D. Cache specified messages

Answer: A,B,C


NEW QUESTION # 334
Which of the following descriptions about antenna deployment locations is correct when implementing WLAN outdoor coverage?

  • A. It is not recommended to deploy directional antennas at a height higher than 12 meters.
  • B. To ensure coverage of a larger area, the antenna should be deployed as high as possible
  • C. To avoid being blocked by trees, it is recommended that the antenna be deployed at a height of no less than 12 meters
  • D. To ensure that there is no blind spot, the antenna should be deployed as low as possible.

Answer: A


NEW QUESTION # 335
According to the free space signal attenuation model, signal strength is related to frequency distance. The higher the frequency, the greater the attenuation, and the farther the distance, the greater the attenuation.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 336
An enterprise uses WAC+FITAP networking, and users find that the AP fails to go online. The cause of this failure may be that the AP and WAC software versions do not match.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 337
......


The HCIP-WLAN V2.0 certification exam is one of the most popular exams in the field of wireless networking. The HCIP-WLAN V2.0 certification is designed for IT professionals who have prior knowledge in wireless fundamentals and have completed the HCNA-WLAN certification. It is a high-level certification that validates your ability to configure, optimize, and troubleshoot enterprise-level wireless networks.

 

H12-323_V2.0 Questions - Truly Beneficial For Your Huawei Exam: https://pass4sure.examstorrent.com/H12-323_V2.0-exam-dumps-torrent.html