[Nov-2022] Feel Fortinet NSE7_EFW-6.4 Dumps PDF Will likely be The best Option
NSE7_EFW-6.4 exam torrent Fortinet study guide
For more info read reference:
Exam Blueprint Preparatory Course
NEW QUESTION 47
Examine the output of the 'diagnose debug rating' command shown in the exhibit; then answer the question below.
Which statement are true regarding the output in the exhibit? (Choose two.)
- A. There are three FortiGuard servers that are not responding to the queries sent by the FortiGate.
- B. The TZ value represents the delta between each FortiGuard server's time zone and the FortiGate's time zone.
- C. A server's round trip delay (RTT) is not used to calculate its weight.
- D. FortiGate will send the FortiGuard queries to the server with highest weight.
Answer: B,D
NEW QUESTION 48
View the central management configuration shown in the exhibit, and then answer the question below.
Which serverwill FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.240
- B. 10.0.1.244
- C. One of the public FortiGuard distribution servers
- D. 10.0.1.242
Answer: C
NEW QUESTION 49
An administrator is running the following sniffer in a FortiGate:
diagnose sniffer packet any "host 10.0.2.10" 2
What information is included in the output of the sniffer? (Choose two.)
- A. IP headers.
- B. Port names.
- C. IP payload.
- D. Ethernet headers.
Answer: A,C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=11186
NEW QUESTION 50
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr 19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?
- A. All IPS-related features have been disabled in FortiGate's configuration.
- B. IPS engine memory consumption has exceeded the model-specific predefined value.
- C. There are communication problems between the IPS engine and the management database.
- D. IPS daemon experienced a crash.
Answer: A
Explanation:
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes. Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated: Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)
NEW QUESTION 51
Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)
- A. Import policy packages from managed devices.
- B. Add devices to FortiManager.
- C. Install configuration changes to managed devices.
- D. Import interface mappings from managed devices.
- E. Preview pending configuration changes for managed devices.
Answer: C,E
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/1200_install_to%20devices/0400_Install%20wizard-device%20settings.htm
There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations.
Install: is used to install configuration changes from Device Manager or Policies & Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn't agree with the changes, cancel and modify them.
Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy & Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list.
Re-install policy: is used to perform a quick install of the policy package. It doesn't give the ability to preview the changes that will be installed to the managed device.
NEW QUESTION 52
View the exhibit, which contains an entry in the session table, and then answer the question below.
Which one of the following statements is true regarding FortiGate's inspection of this session?
- A. FortiGate applied explicit proxy-based inspection.
- B. FortiGate applied proxy-based inspection.
- C. FortiGate forwarded this session without any inspection.
- D. FortiGate applied flow-based inspection.
Answer: B
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
NEW QUESTION 53
A FortiGate is rebooting unexpectedly without any apparent reason. What troubleshooting tools could an administrator use to get more information about the problem? (Choose two.)
- A. Policy monitor.
- B. Firewall monitor.
- C. Logs.
- D. Crashlogs.
Answer: C,D
NEW QUESTION 54
An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real time debug:
diagnose debug application ike-1
diagnose debug enable
In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?
- A. Phase1; IKE mode configuration; XAuth; phase 2.
- B. Phase1; IKE mode configuration; phase 2; XAuth.
- C. Phase1; XAuth; IKE mode configuration; phase2.
- D. Phase1; XAuth; phase 2; IKE mode configuration.
Answer: C
Explanation:
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/IPsec_VPN_Concepts/IKE_Packet_Processing.htm
NEW QUESTION 55
Which two statements about FortiManager is true when it is deployed as alocal FDS? (Choose two.)
- A. It provides VM license validation services.
- B. It caches available firmware updates for unmanaged devices.
- C. It supports rating requests from both managed and unmanaged devices.
- D. It can be configured as an update server, or a rating server, but not both.
Answer: A,B
NEW QUESTION 56
Refer to the exhibit, which contains the output of get system ha status.
Which two statements about the output are true? (Choose two.)
- A. Master is selected based on the priority configured under config system ha.
- B. port7 is used as the HA heartbeat on all devices in the cluster.
- C. The HA management IP is 169.254.0.2.
- D. The slave configuration is synchronized with the master.
Answer: A,B
NEW QUESTION 57
Refer to exhibit, which contains the output of a BGP debug command.
Which statement explains why the state of the 10.200.3.1 peer is Connect?
- A. The TCP session to 10.200.3.1 has not completed the 3-way handshake.
- B. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet.
- C. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
- D. The local router has received the BGP prefixes from the remote peer.
Answer: A
Explanation:
BGP neighbor states and how they change: * Idle: Initial state * Connect: Waiting for a successful three-way TCP connection * Active: Unable to establish the TCP session * OpenSent: Waiting for an OPEN message from the peer * OpenConfirm: Waiting for the keepalive message from the peer * Established: Peers have successfully exchanged OPEN and keepalive messages
NEW QUESTION 58
View the exhibit, which contains the output of a debug command, and then answer the question below.
Which of the following statements about theexhibit are true? (Choose two.)
- A. Port4 is connected to the OSPF backbone area.
- B. The local FortiGate has been elected as the OSPF backup designated router.
- C. In the network on port4, two OSPF routers are down.
- D. The local FortiGate's OSPF router ID is 0.0.0.4
Answer: A,D
NEW QUESTION 59
Examine the following partial output from two system debug commands; then answer the question below.
Which of the following statements are true regarding the above outputs? (Choose two.)
- A. Kernel indirectly accesses the low memory (LowTotal) through memorypaging
- B. The Cached value is always the Active value plus the Inactive value
- C. The unit is running a 32-bit FortiOS
- D. The unit is in kernel conserve mode
Answer: B,C
NEW QUESTION 60
Examine the following partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It has a higher distance than the default route using port1.
- B. It has a lower priority than the default route using port1.
- C. It has a higher priority than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: A
Explanation:
http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103
NEW QUESTION 61
Refer to the exhibits.
Which contain the partial configurations of two VPNs on FortiGate.
An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovered that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must administrator make to fix the issue? (Choose two.)
- A. Set up specific peer IDs on both VPNs.
- B. Use different pre-shared keys on both VPNs
- C. Enable Mode Config on both VPNs.
- D. Change to aggressive mode on both VPNs.
Answer: A,D
NEW QUESTION 62
......
Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certification Path
The Fortinet Network Security Expert (NSE) program is an eight-level training and certification program designed to provide objective confirmation of your network security expertise and knowledge to interested technical professionals. A broad range of self-paced and instructor-led courses are included in the NSE curriculum, as well as realistic, experiential activities that demonstrate mastery of complex concepts of network security.
For the Network Security Analyst, candidates must complete only 2 exams from the available five options. These exams are listed below:
- Fortinet NSE 7 - Advanced Threat Protection
- Fortinet NSE 7 - Enterprise Firewall
- Fortinet NSE 7 - Advanced Analytics
- Fortinet NSE 7 - Cloud Security
Use Valid New NSE7_EFW-6.4 Test Notes & NSE7_EFW-6.4 Valid Exam Guide: https://pass4sure.examstorrent.com/NSE7_EFW-6.4-exam-dumps-torrent.html