HPE6-A71 Free Exam Questions and Answers PDF Updated on Jan-2023

Latest HPE6-A71 Exam Dumps Recently Updated 173 Questions

NEW QUESTION 81
In the WebUI of an Aruba Mobility Controller (MC), where recommended approach for this process generate a tech support file that the Aruba Technical Support team can use to help customers?

• A. Maintenance> Copy logs> download logs
• B. Diagnostics> Technical Support> System Information
• C. Diagnostics>Technical Support> Copy Logs
• D. Configuration> System> Logging

Answer: B

Explanation:
Explanation
References:
Generating a crash Dump:Diagnostics>Technical Support>Copy Crash Files
Generating a tech support file:Diagnostics> Technical Support> System Information

 

NEW QUESTION 82
Which methods can be used to configure RAP redundancy when connected to two redundant Aruba Mobility Controllers (MCs) in the DMZ? (Select two.)

• A. Virtual IP address of the two controllers.
• B. AirWave direction to RAPs redundant Mobility Controllers.
• C. IPSec High Availability (HA) between two cluster members.
• D. Active and Standby AAC.
• E. Primary and backup LMS IP addresses.

Answer: B,D,E

 

NEW QUESTION 83
An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached. The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic.
But, when users connect with their wired desktops, they have full access to corporate resources.
What must the administrator do to restrict desktop usage based on the users' role assignment?

• A. Implement ACLs on the RAP port.
• B. Apply a server-derived role privacy to the RAP port.
• C. Identify the RAP port as untrusted.
• D. Implement per-user tunnel node on the RAP.

Answer: C

 

NEW QUESTION 84
Refer to the exhibit.

The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

• A. The AP is configured as a RAP to terminate on a stand-alone controller.
• B. The AP is configured as a RAP to terminate on a Mobility Master.
• C. The AP is configured to terminate on a Mobility Controller in a cluster.
• D. The AP is configured to terminate on a non-cluster Mobility Controller.

Answer: B

 

NEW QUESTION 85
Refer to the exhibit.

An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled.There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?

• A. APs reboot and rejoin the cluster.
• B. Connected users are de-authenticated
• C. High value sessions are synchronized.
• D. APs and clients are fully replicated.

Answer: B

 

NEW QUESTION 86
Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?

• A. show ap active
• B. show lc-cluster group-membership
• C. show aaa cluster essid
• D. show switches

Answer: B

Explanation:
References:

 

NEW QUESTION 87
An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication fails, but the 802.1X user authentication passes for a user who connects?

• A. 802.1X default user role
• B. Machine authentication default user role
• C. Machine authentication initial user role
• D. 802.1X initial user role

Answer: B

 

NEW QUESTION 88
Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?

• A. Split-tunnel
• B. Tunnel
• C. Decrypt-tunnel
• D. Bridge

Answer: C

 

NEW QUESTION 89
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of
10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.305.114. The administrator accesses an AP associated with this cluster, reboots it, and accesses apboot mode. The administrator executes the printenvcommand.
Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

• A. servername
• B. master_ip
• C. cfg_lms
• D. nodelist

Answer: D

 

NEW QUESTION 90
A group of users on the same floor of a campus residence experience connectivity problems continuously throughout the morning. The administrator suspects that it is a L1 problem with physical interference.
What can the administrator do to find the cause of this problem?

• A. Access a controller's spectrum analysis data from AirWave's dashboards, under Home.
• B. Access RAPIDS data from AirWave's dashboards, under Home.
• C. Access RAPIDS data from AirWave's RAPIDS section.
• D. Access a controller's spectrum analysis data directly from AirWave with Quick Links.

Answer: A

 

NEW QUESTION 91
Refer to the exhibit.

Which controller connection with the Aruba as the cluster leader?

• A. Controller C
• B. Controller B
• C. Controller D
• D. Controller A

Answer: B

 

NEW QUESTION 92
Refer to the exhibit.

An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to addthe Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.
What should the administrator implement to allow the RAP to connect tothe MC at the Secondary DMZ site while the outage at the primary site persists?

• A. Dynamic discovery through DHCP Option 43
• B. Static configuration from apboot mode
• C. Dynamic discovery through DHCP Option 60
• D. Dynamic discovery through multicast ADP

Answer: A

 

NEW QUESTION 93
Refer to the exhibit.

Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-A Mobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

• A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
• B. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
• C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
• D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.

Answer: C

 

NEW QUESTION 94
Refer to the exhibit.
An administrator wants to verify the operation of MultiZone in a network. The administrator uses the command show ap debug multizone to generate the output shown in the exhibit.
Based on the output, which statement is true?

• A. Zone 1 is the primary zone, and zone 0 is the data zone.
• B. The maximum VAPs in the MultiZone is 15.
• C. The primary zone has limited the data zone to one WLAN.
• D. The MultiZone APs are in a cluster.

Answer: C

 

NEW QUESTION 95
Which Aruba Unified Communications and Collaboration (UCC) deployment mode should be used when UCC is disabled on the Mobility Controllers (MCs)?

• A. Heuristics mode
• B. SDN-API mode
• C. WMM mode
• D. ALG mode

Answer: C

 

NEW QUESTION 96
An administrator needs toauthenticate users connected to an ArubaOS-Switch. The Aruba Mobility Controller (MC) authenticates the user and assigns user roles to wired users.
Which mode should the administrator configure on the MC?

• A. Per-port tunneled node
• B. Split-tunneled node
• C. Per-user tunneled node
• D. VLAN tunneled node

Answer: C

 

NEW QUESTION 97
A cluster has two Aruba 7240 Mobility Controllers (MCs) and two Aruba 7220Mobility Controllers (MCs).
How is the cluster leader elected if all controllers have the default priority?

• A. The 7240 controller with the lowest IP address is elected.
• B. The 7240 controller with the highest MAC address is elected.
• C. The controller with the highest IP address is elected.
• D. The controller with the highest MAC address is elected.

Answer: B

 

NEW QUESTION 98
Refer to the exhibit. What can the administrator determine from the configuration shown in the exhibit?

• A. MM2 is the Mobility Master.
• B. All the controllers run in a cluster.
• C. All the controllers run in standalonemode.
• D. VRRP is used for Mobility Master redundancy.

Answer: A

 

NEW QUESTION 99
An administrator wants to temporarily deny login access to users who fail 802.1x authentication functions three or more times. Which process will the administrator need to configure?

• A. EAP termination
• B. captive portal
• C. fail through
• D. blacklisting

Answer: D

 

NEW QUESTION 100
An administrator at Campus A manages Aruba Mobility Controllers (MCs).The administrator defines a server group that includes a local ClearPass server and a remote Microsoft RADIUS server. The ClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has the credentials for users at Campus B.Users at Campus A successfully authenticate and connect to the Campus A wireless network.
However, when users from Campus B visit Campus A they fail authentication.
What can the administrator do to solve this problem?

• A. Enable machine authentication on the Mobility Controllers.
• B. Enable EAP termination on the ClearPass server.
• C. Enable FastConnect on the CampusA Mobility Controllers.
• D. Enable EAP-TTLS with EAP Termination on the Mobility Controllers.

Answer: C

 

NEW QUESTION 101
An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?

• A. Use different AP Group names for the two zones.
• B. Enable CPSec in the MultiZone profile for both the primary and data zone.
• C. Enable MultiZone booting in the MultiZone AP apboot configuration mode.
• D. Add the MultiZone APs to the data zone's CPSec whitelist.

Answer: D

 

NEW QUESTION 102
An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.
What should the administrator use for this upgrade?

• A. Aruba image
• B. Upgrade Profiles
• C. Loadable Service Module (LSM)
• D. ClusterUpgrade Manager

Answer: A

 

NEW QUESTION 103
Refer to the exhibit.

An administrator examines theconfiguration of an AP from apboot mode shown in the exhibit.
What can the administrator determine from the configuration?

• A. RAP terminated on a Mobility Master.
• B. RAP terminated on a stand-alone controller.
• C. AP terminated on a non-cluster Mobility Controller.
• D. AP terminated on a Mobility Controller in a cluster.

Answer: D

 

NEW QUESTION 104
......

HP HPE6-A71: Aruba Certified Mobility Professional Exam Topics

Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our HPE6-A71 exam dumps will include the following topics:

Integrate and implement Aruba Mobile First architecture components and explain their uses.

• Integrate components of the Aruba Mobile First Architecture-
• Describe and differentiate advanced licensing features
• Explain Remote Access architectures and how to integrate the architectures.

Configure and validate Aruba WLAN secure employee and guest solutions.

• Configure Remote Access with Aruba Solutions such as RAP and VIA
• Configure and deploy redundant controller solutions based upon a given design.
• Configure a Mesh WLAN

Implement advanced services and security.

• Enable multicast DNS features to support discovery across VLAN boundaries
• Implement Mobility Infrastructure hardening features
• Configure an AAA server profile for a user or administrative access
• Configure primary zones and data zones to support MultiZone AP
• Implement mobility (roaming) in an Aruba wireless environment
• Configure role derivation, and explain and implement advanced role features

Manage and monitor Aruba solutions.

• Use AirWave to monitor an Aruba Mobility Master and Mobility Controller.
• Perform maintenance upgrades and operational maintenance.

Troubleshoot Aruba WLAN solutions.

• Troubleshoot role-based access, per-port based security and Airmatch
• Troubleshoot issues related to services and security
• Troubleshoot Remote Access
• Troubleshoot controller communication
• Troubleshoot the WLAN

How much HP HPE6-A71: Aruba Certified Mobility Professional exam cost

HP HPE6-A71: Aruba Certified Mobility Professional exam cost is $110, for more information please visit Official Website.

 

HP HPE6-A71 Real 2023 Braindumps Mock Exam Dumps: https://pass4sure.examstorrent.com/HPE6-A71-exam-dumps-torrent.html