About Nutanix NCM-MCI-6.10 Exam Braindumps

High passing rate of our products

Based on the feedbacks from our user, the passing rate of our NCM-MCI-6.10 actual lab questions has reached up to 97% to 100%. That means a person who has used our products can almost pass the test. We are sure about the quality of our NCM-MCI-6.10 study materials because we always get the latest information about exam, then we treat the resources and compile our products strictly and professionally. If you fail exam with our NCM-MCI-6.10 exam collection unluckily, we will give you full refund without any doubt. This kind of situation is rare, but you can assure that you will feel free-worrying shopping of NCM-MCI-6.10 actual lab questions. Please rest assured.

As the increasing development of the society if you want to pass exam in the shortest time and are looking for Nutanix NCM-MCI-6.10 study materials, our products will be good selection for you. Under this circumstance, many companies have the higher requirement and the demand for the abilities of workers. There is no doubt that passing exams and obtain a Nutanix Master Level certification can make you stand out from the other competitors and navigate this complex world. Maybe everyone knows a certification is important but choosing valid NCM-MCI-6.10 actual lab questions is hard. So it has very important significances of getting your favorable job, promotion and even pay-raise. What our company specializing in NCM-MCI-6.10 exam collection is helping our customer to pass exam easily. For that, we spent many years on researches of developing helping NCM-MCI-6.10 actual lab questions and make it become the best help for the preparation. Our NCM-MCI-6.10 study materials are the best exam study guide materials you have ever seen certainly.

Compiling based on real test

Our company is engaging in improving the quality of NCM-MCI-6.10 exam collection and customer service constantly. After the development of many years, we find only the true subject of past exam questions are authoritative and have time-validity. So, according to the result of studying which made by our education elites, we develop the new type of NCM-MCI-6.10 actual lab questions based on the true subject of exam content in past year. In the meantime, we will revise the NCM-MCI-6.10 study materials and we are sure that it is suitable to the latest test continually. If you have any doubt about the questions or advice of our NCM-MCI-6.10 exam collection, we will provide the free demo for your reference before purchasing.

Delighted performance you can get

The NCM-MCI-6.10 study materials of our company have come a long way since ten years ago and gain impressive success around the world. The quality of our questions speaks louder than our publicity. Because you can stand out by using our NCM-MCI-6.10 exam collection and realize your dreams such as double or triple your salary, get promotion and play an indispensable role in your working environment, be trusted by boss and colleagues around you. We can prove the usefulness of the NCM-MCI-6.10 actual lab questions with delighted outcomes rather than well-turned words. Once you place the order on our website, you will believe what we promised here.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Nutanix NCM-MCI-6.10 Exam Syllabus Topics:

Section	Weight	Objectives
Advanced Platform Configuration and Troubleshooting	25%	- Prism Central and Prism Element configuration - Security configuration and compliance - API and CLI-based operations - Cluster management, expansion and maintenance - Integration with third-party systems
Analyze and Optimize Storage Performance	20%	- Evaluate and resolve competing workload requirements - Optimize storage configuration and settings - Troubleshoot storage performance bottlenecks - Understand storage internals and I/O patterns
Network Performance and Security	20%	- Network troubleshooting and optimization - Tune overlay networking and traffic flow - Implement and analyze Flow security policies - Optimize physical and virtual network configurations
Business Continuity and Disaster Recovery	15%	- Disaster recovery strategy implementation - Replication and recovery configuration - Failover and failback operations - BCDR testing and validation
Virtualization and VM Performance Optimization	15%	- AHV administration and workload management - VM resource adjustment and optimization - High availability and migration management - Performance metrics analysis and tuning
Monitoring, Automation and Operational Efficiency	5%	- Monitoring and alerting configuration - Operational process optimization - Automation workflows and tools

Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) Sample Questions:

Question #1

The Database team is reporting performance degradation for a business-critical application on Saturdays.
The team is requesting monitoring of processor, memory and storage utilization for the cluster for the application: SQL01, SQL02.
The report should contain views for the following:
* At the cluster level, only for the Cluster 1: The maximum percentage of CPU used
* At the VM level, including any future VM with the prefix SQL: The maximum time taken, maximum percentage of time a VM waits to use the physical CPU, out of the total CPU The report should run on Sundays at 12:00 AM for the previous 7 days. The report should show when completed.
Create a report named SQL_Batch_Saturday that meets these requirements.
Generate an instance of the report named SQL_Batch_Saturday as a CSV and save the file.
Note: You must name the report SQL_Batch_Saturday to receive any credit. Any other name will not be accepted. SMTP is not configured.

Reveal Solution Discussion 0

Correct Answer:

See the Explanation below for detailed answer.
Explanation:
Here is the step-by-step solution to create and run the report, performed entirely within Prism Central.
1. Create the Analysis Session
First, we will build the charts and entities for the report using the Analysis tool.
* From the Prism Central main menu, navigate to Operations > Analysis.
* Click the + New Session button.
* Add the required entities:
* In the "Entities" search box, type Cluster 1 and select Cluster: Cluster 1.
* In the "Entities" search box, type SQL01 and select VM: SQL01.
* In the "Entities" search box, type SQL02 and select VM: SQL02.
* Click Add Charts > New Chart to add the Cluster CPU chart:
* Title: Cluster 1 Max CPU Usage
* Entity Type: Cluster
* Metric: Cluster CPU Usage %
* Aggregation: Select Maximum.
* Click Add.
* Click Add Charts > New Chart to add the VM CPU Ready Time chart:
* Title: VM Max CPU Ready Time
* Entity Type: VM
* Metric: CPU Ready Time %
* Aggregation: Select Maximum.
* Click Add.
2. Save and Configure the Report
Now, save the session as a report and configure it to dynamically include all VMs with the SQL prefix.
* Click the Save as Report icon (the bookmark icon in the upper right).
* Name the report SQL_Batch_Saturday and click Save.
* Navigate to Operations > Reports.
* Find the SQL_Batch_Saturday report you just created and click its name to open the report editor.
* In the Entities tile, click the Edit (pencil) icon.
* By default, it will list "Cluster 1", "SQL01", and "SQL02".
* Change the VM selection:
* Select the radio button for All VMs prefixed with.
* In the text box, enter SQL.
* Ensure "Cluster 1" is still listed under "Clusters".
* Click Save.
3. Schedule the Report
* While still in the report editor for SQL_Batch_Saturday, click the Schedule button.
* Configure the schedule:
* Recurrence: Weekly
* Repeat on: Sunday
* Start Time: 12:00 AM
* Time Range: Previous 7 Days
* Configure the notification (as SMTP is not available):
* Expand the Notification Settings section.
* Check the box for Notify when ready (this enables the bell icon notification).
* Ensure "Email Report" is not checked.
* Click Save.
4. Generate and Save the CSV Instance
Finally, run the report now and download the CSV as requested.
* Navigate back to the main Operations > Reports list.
* Select the checkbox next to SQL_Batch_Saturday.
* Click the Actions dropdown and select Run Now.
* In the dialog, confirm the time range (e.g., "Last 7 Days") and click Run.
* Click the Report Instances tab.
* Wait for the report instance "SQL_Batch_Saturday" to finish running (the status will change from
"Running" to Succeeded).
* Once it has succeeded, click the Download (arrow) icon for that instance.
* Select the CSV format.
* Save the file to the desktop.

Question #2

Task 13
An administrator found a CentOS VM, Cent_Down, on the cluster with a corrupted network stack. To correct the issue, the VM will need to be restored from a previous snapshot to become reachable on the network again.
VM credentials:
Username: root
Password: nutanix/4u
Restore the VM and ensure it is reachable on the network by pinging 172.31.0.1 from the VM.
Power off the VM before proceeding.

Reveal Solution Discussion 0

Correct Answer:

See the Explanation for step by step solution.
Explanation:
To restore the VM and ensure it is reachable on the network, you can follow these steps:
Log in to the Web Console of the cluster where the VM is running.
Click on Virtual Machines on the left menu and find Cent_Down from the list. Click on the power icon to power off the VM.
Click on the snapshot icon next to the power icon to open the Snapshot Management window.
Select a snapshot from the list that was taken before the network stack was corrupted. You can use the date and time information to choose a suitable snapshot.
Click on Restore VM and confirm the action in the dialog box. Wait for the restore process to complete.
Click on the power icon again to power on the VM.
Log in to the VM using SSH or console with the username and password provided.
Run the command ping 172.31.0.1 to verify that the VM is reachable on the network. You should see a reply from the destination IP address.
Go to VMS from the prism central gui
Select the VMand go to More -> Guest Shutdown
Go to Snapshots tab and revert to latest snapshot available
power on vm and verify if ping is working

Question #3

Your security team is working on automation to manage Security Policies.
They have exported some of the existing rules to the file "Security Policy.txt" located on the desktop. This file needs to be modified for the test environment.
* All rules except the quarantine rule should be logged.
* Only the Quarantine rule should be enforced, the other rules will only be logged.
* The quarantine rule should affect the SecOps environment.
* The SMB rule should only affect VMs with the "smbhost" and "smbclient" tags.
* The "DN test" policy should allow ipv6 and should not restrict any protocols between the included tiers.
There are three rules in the file, do not delete, add or copy lines. Only replace xxxx with the correct value as appropriate. It is possible that not all "xxxxx" will be replaced.
Save the file with the same name.
Possible values to replace the "xxxxx":
8080
ALL
APPLY
false
MONITOR
Non-Prod
SecOps
smbhost
smbclient
TCP
True

Reveal Solution Discussion 0

Correct Answer:

See the Explanation below for detailed answer.
Explanation:
Here is the step-by-step solution to modify the security policy file as required.
Navigate to the desktop and open the file Security Policy.txt (which corresponds to the provided Security Policy.bak content) using a text editor like Notepad.
Modify the file content by replacing the xxxxx and xxxx placeholders according to the security requirements.
Modifications by Rule
Here are the specific changes to make within the file:
1. Quarantine Rule
Requirement 1 (No Logging): The quarantine rule should not be logged.
Change "is_policy_hitlog_enabled": "xxxxx" to "is_policy_hitlog_enabled": "false" Requirement 2 (Enforce): This rule must be enforced.
Change "action": "xxxxx" (under quarantine_rule) to "action": "APPLY"
Requirement 3 (Environment): The rule must affect the "SecOps" environment.
Change "Environment": ["xxxxx"] to "Environment": ["SecOps"]
2. SMB-block Rule
Requirement 1 (Logging): This rule must be logged.
Change "is_policy_hitlog_enabled": "xxxxx" to "is_policy_hitlog_enabled": "True" Requirement 2 (Monitor): This rule must not be enforced, only logged.
Change "action": "xxxxx" (under isolation_rule) to "action": "MONITOR"
Requirement 4 (Tags): The rule must affect the "smbhost" and "smbclient" tags.
Change "SMBv1": ["xxxxx"] to "SMBv1": ["smbhost"]
Change "SMRv1": ["xxxxx"] to "SMRv1": ["smbclient"]
3. DN test (dn-policy1) Rule
Requirement 2 (Monitor): This rule must not be enforced, only logged.
Change "action": "xxxx" (under app_rule) to "action": "MONITOR"
Requirement 5 (Allow IPv6): This policy must allow IPv6 traffic.
Change "allow_ipv6_traffic": "xxxx" to "allow_ipv6_traffic": "True"
Final Step
After making all the replacements, Save the file, overwriting the original Security Policy.txt on the desktop.
Example of completed rules (replace xxxxx accordingly):
Rule Name: Quarantine Rule
Logged: false
Action: APPLY
Environment: SecOps
Protocols: TCP
Ports: 8080
Rule Name: SMB Rule
Logged: True
Action: MONITOR
Tags: smbhost, smbclient
Protocols: TCP
Ports: 8080
Rule Name: DN Test Policy
Logged: True
Action: MONITOR
Environment: Non-Prod
Protocols: ALL
Ports: 8080

Question #4

Due to new security requirements, an administrator has been tasked with updating the security settings for user accounts within Prism Element on Cluster 1.
An SSL Certificate Signing Request with Subject Alternative Name should be generated for submission to the security team's Certificate Authority with the following details:
countryName = US
stateOrProvinceName = North Carolina
localityName = Durham
organizationName = ACME
organizationalUnitName = Infrastructure
commonName = prism_element.ACME.org
emailAddress = [email protected]
Alternate names = cvm1.ACME.org, cvm2.ACME.org, cvm3.ACME.org
Encryption: RSA 2048, sha256
When the Certificate Signing Request is generated, place a copy of both the .cnf file and the .csr file on the desktop named 'prism_element_acme.cnf' and 'prism_element_acme.csr' Save a copy of the command(s) used for this scenario to a new file on the desktop named "Task 5.txt".
Note: You must copy and paste the command(s) and output from SSH to the "Task 5.txt" file to achieve all points available.

Reveal Solution Discussion 0

Correct Answer:

See the Explanation below for detailed answer.
Explanation:
Here is the step-by-step solution to generate the Certificate Signing Request (CSR) on Cluster 1.
This entire process is performed from an SSH session connected to a CVM (Controller VM) on Cluster 1.
1. Access Cluster 1 CVM
* From Prism Central, navigate to Hardware > Clusters and click on Cluster 1 to open its Prism Element (PE) interface.
* In the Cluster 1 PE, navigate to Hardware > CVMs to find the IP address of any CVM in the cluster.
* Use an SSH client (like PuTTY) to connect to the CVM's IP address.
* Log in with the admin user and password.
2. Create the Configuration File (.cnf)
To include the Subject Alternative Names (SANs), you must first create a configuration file.
* In the CVM's command line, create the .cnf file using a text editor:
vi prism_element_acme.cnf
* Press i to enter "Insert" mode.
* Paste the following text exactly into the editor:
Ini, TOML
[ req ]
default_bits = 2048
distinguished_name = req_distinguished_name
req_extensions = v3_req
prompt = no
[ req_distinguished_name ]
C = US
ST = North Carolina
L = Durham
O = ACME
OU = Infrastructure
CN = prism_element.ACME.org
emailAddress = [email protected]
[ v3_req ]
subjectAltName = @alt_names
[ alt_names ]
DNS.1 = cvm1.ACME.org
DNS.2 = cvm2.ACME.org
DNS.3 = cvm3.ACME.org
* Press Esc to exit "Insert" mode, then type :wq and press Enter to save and quit vi.
3. Generate the CSR and Key
* Run the following openssl command. This command uses the .cnf file to generate the new CSR (.csr) and a corresponding private key (.key), applying the sha256 encryption as requested.
Bash
openssl req -new -nodes -out prism_element_acme.csr -keyout prism_element_acme.key -config prism_element_acme.cnf -sha256
* The command will output the following, confirming the key generation:
* Generating a 2048 bit RSA private key
* ...................+++++
* ..................................+++++
* writing new private key to 'prism_element_acme.key'
* -----
4. Save Files to the Desktop
You will now copy the contents of the generated files from the CVM to your desktop.
* For Task 5.txt (Commands and Output):
* Open a new Notepad file on the desktop.
* Copy and paste all the commands you ran in the SSH session and their full output (as shown in steps 2 and 3) into this file.
* Save the file on the desktop as Task 5.txt.
* For prism_element_acme.cnf:
* In the CVM SSH session, display the file's content:
cat prism_element_acme.cnf
* Copy the entire text output (starting from [ req ]).
* Open a new Notepad file on the desktop.
* Paste the content and save the file as prism_element_acme.cnf.
* For prism_element_acme.csr:
* In the CVM SSH session, display the file's content:
cat prism_element_acme.csr
* Copy the entire text output, including the -----BEGIN CERTIFICATE REQUEST----- and ----- END CERTIFICATE REQUEST----- lines.
* Open a new C:\Users\admin\Desktop\Notepad file on the desktop.
* Paste the content and save the file as prism_element_acme.csr.